Static Lift Tables (Mains Operated)
|
WARRIOR Static Lift Tables
|
WARRIOR Static Lift Table HY Series
WARRIOR Static Lift Table |
- Low Profile Lift Tables achieve a low closed height and usually eliminate the need for a pit
- They lift up to around 860mm and also help alleviate bending and twisting often found in industrial environments
- Tables are controlled by a 24V "satellite" hydraulic power pack consisting of an Up, Down and Emergency Stop buttons
- Tables are powered by AC380v / 50Hz / 3 phase mains
- Pressure relief valve fitted to protect the hydraulic system
- Oil less bushing on axle pivots
- Emergency check valve to ensure slow controlled descent in the event of a hydraulic line failure
- Removable lifting eyes to facilitate easy handling and installation
- Tables have fully interlocked descent arrestors should there be an obstruction
- These tables are manufactured to EN1570:1999 and are IP54 protected
- Available in two standard capacities 1000Kg & 1500kg the units have both Full Top and U shape derivatives
|
| |
|
| Model |
HY1001 |
HU1000 |
HY1501 |
HU1500 |
| Capacity |
1000 |
1000 |
1500 |
1500 |
| Maximum Height (mm) |
860 |
860 |
880 |
860 |
| Minimum Height (mm) |
85 |
85 |
105 |
105 |
| Platform (LxW) (mm) |
1450x1140 |
1450x1140 |
1600x800 |
1600x1180 |
| Lifting Cycle (sec) |
20 |
18 |
20 |
18 |
| Stroke (mm) |
775 |
775 |
775 |
775 |
| Power Pack Kw |
0.75 |
0.75 |
1.5 |
1.5 |
| Nett Weight (Kg) |
357 |
280 |
362 |
380 |
|
WARRIOR Static Lift Tables
|
WARRIOR Static Lift Table |
- WARRIOR Lift Tables can be used either at ground level or in
a pit
- They lift up to 1050mm and also help alleviate bending and
twisting often found in industrial environments
- Tables are controlled by a 24V "inbuilt" hydraulic power pack
consisting of an Up and Down pendent
- Tables are powered by AC380v / 50Hz / 3 phase mains
- Pressure relief valve fitted to protect the hydraulic system
- Oilite bushing on axle pivots
- Emergency check valve to ensure slow controlled descent in the event of a hydraulic line failure
- Removable lifting eyes to facilitate easy handling and installation
- Tables have fully interlocked descent arrestors should there be an obstruction
- These tables are manufactured to EN1570:1999 and are IP54 protected
- Available ex stock in one standard capacity 2000Kg
- Other models available or request
|
| |
|
| Model |
HW2002 |
| Maximum Height (mm) |
1050 |
| Minimum Height (mm) |
230 |
| Platform (LxW) (mm) |
1600x1000 |
| Lifting Cycle (sec) |
20 |
| Power Pack (kw) |
1.5 |
| Nett Weight (kg) |
268 |
|
| |
